Operating Instruction of Shot Blasting Machine

1. The operator of Shot Blasting Equipment implement train strictly, and be familiar with its performance and characteristics.

2. Knowing about operating procedures, usage, repair, maintenance in operation instruction of Shot Blasting Machine.

3. Operator must check whether the control cabinet and all switches in the required location or not, then you can open it, so as not to damage to electrical and mechanical equipment and resulting in equipment accidents.

4. Non-local operators can not operate or touch the electrical switch control area at random, and not close to the machine work area so as to avoid accidents.

5. Operator must wear protective clothing, glasses and so on.

6. Operator starts with special attention to panel instructions, until all instructions reach normal value, can operate a small crane into the work process. If there has individual instrument indicates there is a large error, then shut down immediately.

7. Operator must inspect the equipment whether there are abnormal sound and overheating phenomenon or not when the shot blasting equipment is running.

8. Operator must maintenance it routinely according to equipment management. Clean the dust and debris in the dust filter weekly to ensure the equipment intact rate.

9. The operator must be civilized and safe production, at the same time implement the transfer system strictly.

10. Ending work, cut off the power switch immediately so as not to make the shot blasting machine in operation. And cleaning up the workplace.