How About Use Scale of Sand Blasting Room?

Sand blasting is a way to clear up the appearance with high speed grit, it can remove the scale, grease, paint on appearance to get a more uniform appearance quality. Subsequent process can be welded, oxidized, coated, chemical heat treatment, phosphating and so on. Sandblaster can make the appearance of workpiece residual compressive stress, its effect of strengthening is worse than shot blasting, deformation is smaller than shot blasting. Follows are Sand Blasting Room usage scale:

1. Pretreatment: electroplating, painting, spraying are covered before the blasting disposal, the appearance is health, greatly improve the cover layer adhesion and anti-corrosion ability.

2. Finishing: metal parts remove the scale, dust, non-metallic products process appearance finishing, restoration of paint painting.

3. The old pieces of innovation: cars, Sand Blasting Room electrical equipment, process cleaning and innovation to eliminate fatigue stress and extend service life.

4. Decorative: all metal or non-metallic products eliminate the appearance traces, and process argon matte treatment to promote product appearance level.

5. Burr disposal: removing small burrs of machined parts, eliminate overflow rubber burrs of injection parts.

6. Bad products rework: remove products bad cover, poor color and printing.

7. Strengthen: add metal parts external hardness, eliminate stress.